What a trade show kit really costs in the UAE: three priced tiers of event branding materials, the order to buy them in and when to place the order.
A 3 by 3 metre shell scheme stand at a Dubai trade show often costs AED 12,000 to 25,000 before a single panel is printed. So the first question we hear from new exhibitors is rarely "what can you print". It is "which event branding materials do I actually need, and what will they cost". This guide answers that with line items, realistic AED ranges and the order we would spend the money in if the budget were ours.
Everything listed here is printed in house at our Ajman facility and delivered to venues across all seven emirates. We quote by WhatsApp, and minimum runs are small, so a single stand kit of event branding materials is a normal order for us rather than a special request.
Three kits of event branding materials, priced
Most stand budgets land in one of three tiers. The table shows what each tier usually includes and what the printed items alone should cost. Venue space, furniture hire and electricity are separate bills.
| Tier | What is in the kit | Typical print spend |
|---|---|---|
| Starter | Two roll up banners, one printed table cover, 100 flyers | AED 900 to 1,400 |
| Standard | Panel graphics, promotion table, table cover, social media frame, foam board signs | AED 3,500 to 6,000 |
| Full | Backlit shell scheme walls, counters, tent or gazebo for outdoor zones, props, giveaways | AED 9,000 to 18,000 |
The jump from Starter to Standard is where most of the visual difference sits. The jump from Standard to Full is mostly structure and lighting, which matters in a large hall and matters far less at a mall activation.
Spend in this order
When the money only stretches to a few pieces, buy them in the sequence below. Each item of event branding materials adds more visibility than the one after it.
- Back wall graphics. Visitors see your shell scheme panel graphics from 15 metres away. Nothing else on the stand works that hard.
- A branded promotion table. A folding promotion table gives staff a place to stand, sample and scan badges, and the printed wrap carries your logo at eye level.
- A fitted cover. If the organiser supplies furniture instead, a printed table cover hides the hire table and adds a second logo surface for under AED 350.
- Roll up banners. Two roll up banners at 85 by 200 cm frame the stand entrance and travel in a car boot afterwards.
- Foam board signs. Prices, QR codes and offers printed on 5 mm board cost a few dirhams each and save your team repeating the same sentence all day.
- A social media frame. Once the essentials are covered, a frame earns photos that leave the hall with your logo in them.
Sizes and materials that hold up in UAE venues
The event branding materials below are the ones we print most for UAE shows, with the sizes that fit standard stands.
Promotion tables
The standard folding unit is about 80 cm wide and 85 cm tall with a round or square top. The printed skin is fabric or PVC pulled over a plastic frame. Fabric looks softer under hall lighting and folds flat; PVC wipes clean after a day of juice samples. Expect AED 450 to 750 for a single unit including print, and ask for a header board if your logo needs to clear the heads of people standing in front of it.
Tents and gazebos for outdoor zones
Outdoor activations at Global Village, beach clubs or school fairs need shade more than graphics. A 3 by 3 metre branded tent or gazebo with a printed canopy and one back wall starts around AED 2,200. Ask for a steel frame rather than aluminium if it will stand through a windy afternoon on the coast, and always weight the legs.

Covers and runners
A fitted stretch table cover for a 6 foot trestle runs AED 280 to 400 printed all over. A runner that drapes down the front is cheaper and swaps between events if you print the logo without a date. Polyester stretch fabric is the usual choice because it does not crease in transit.
Frames and party props
A hand held social media frame on 10 mm foam board measures about 90 by 70 cm and costs AED 180 to 260. Add a few printed party props on sticks, speech bubbles or product cutouts, and your stand becomes the one people queue at for a photo. Keep the hashtag large and the frame window wide enough for two people.
Foam board
Printed foam board signs come in 5 mm and 10 mm thickness. Use 5 mm for anything on a wall or easel and 10 mm for free standing pieces. An A1 board costs roughly AED 90 to 140 with lamination, and lamination is worth it under hall lights because it stops fingerprints showing.
Need promotion table priced for your quantity?
When to order event branding materials
Work backwards from the build day, not the opening day. Most organisers hand over the hall 24 to 48 hours before doors open, and the shell scheme contractor usually needs your panel graphics at least a day before that to fit them. Most event branding materials take two to five working days to produce once artwork is approved.
- Three weeks out: confirm stand number, panel sizes and whether the walls are system panels or raw MDF. Panel heights differ between organisers, so never reuse last year's file without checking.
- Two weeks out: approve artwork for the large items, the panels, counter wrap and backdrop. These take the longest to print and finish.
- Ten days out: approve tables, covers, frames and foam boards. These are quick to produce but easy to forget.
- Five days out: order giveaways and flyers. Short runs print in a day or two.
Rush jobs are possible, and we do them, but a panel set printed in 24 hours leaves no time for a reprint if a logo is wrong.
Mistakes that waste money on event branding materials
These are the errors we see repeated every season, and each one is avoidable at the briefing stage.
- Printing the event name and date on everything. A table cover that reads "Gulfood 2026" is landfill in March. Put dates on flyers and keep the hard goods evergreen.
- Buying a 3 metre backdrop for a 2 metre stand. Measure the clear wall width after the shell scheme posts are in. A pop up display that does not fit the booth gets left in the car.
- Tiny text on back walls. Anything under 4 cm tall is unreadable from the aisle. One line, one offer, one phone number.
- Forgetting the counter. Staff put bags and laptops on the promotion table and hide the print. A separate exhibition counter with storage keeps the branded surface clear.
- Skipping lamination. Matte lamination on panels and boards kills glare under spotlights and survives being wiped down.
Reusing the kit after the show
A well planned set of event branding materials should work three or four times a year. The promotion table goes to a mall weekend, the frame goes to the office party, and the tent goes to a sports day. Store printed fabric rolled around a tube rather than folded, keep foam boards flat and out of a hot car, and photograph every piece after each event so the next brief starts with what you already own.
For a complete component list with sizes, our exhibition booth printing page covers every part of a stand. Current prices sit in the events and exhibitions range. Send us your stand plan on WhatsApp and we will mark up which event branding materials fit, which do not, and which you can skip.
Ready to get started?
Look, we have been in this business long enough to know what works and what doesn't. If you are not sure where to begin, just give us a call. No pressure, no sales pitch. We will walk you through the options and give you an honest quote.
What you get with us:
- Straight answers about what you actually need (not what costs most)
- Fair pricing. We will tell you how to save money where it makes sense
- Quick turnaround when you need it, or save by planning ahead
Need Promotion Table in the UAE?
Our team produces promotion table and related print for businesses across Dubai, Abu Dhabi, Sharjah and every emirate. Send us your brief for a same day quote.
Get Your Free Quote+971 56 978 6395
Atiya Naaz
Marketing Head, Branding Blitz
Atiya brings five years of hands on experience in the UAE printing and branding industry. Based in Abu Dhabi, she leads marketing team at Branding Blitz, helping businesses across Dubai, Abu Dhabi, Sharjah, and all emirates find right print solutions for their branding needs. Her expertise spans corporate identity materials, exhibition printing, packaging design, and digital marketing strategy for the regional market.
Related resources: See our exhibition booths, events & exhibitions and event props pages for specifications, quantity pricing and design options across the UAE.



