Band heights, coverage levels, logo rules and real AED prices per square metre for frosted film on meeting room, reception and partition glass in UAE offices.
Every glass meeting room in a Dubai office eventually gets the same complaint: people on the floor can see the slides, and the people inside feel like they are in a shop window. Frosted film fixes that for a fraction of the cost of blinds or solid walls, and it carries the brand at the same time. The trouble is that it is usually ordered as an afterthought, measured by eye, and installed at a height that blocks nothing useful.
This guide is what we send facilities teams and fit out contractors before they order. It covers the three types of frosted film, the band heights that actually give privacy in an open plan office, how to handle logos and patterns, and what it costs per square metre installed across the UAE. We cut and print the film in house in Ajman and install in Dubai, Abu Dhabi, Sharjah and Ajman.
Three kinds of frosted film and when each fits
The word covers three quite different products, and quoting goes faster when the brief names the right one.
- Plain etched glass vinyl. A translucent self adhesive film applied as a solid band or full panel. It diffuses light at around 70 percent transmission and hides detail beyond about 30 cm from the glass. This is the privacy workhorse, sold on our site as frosted glass stickers.
- Cut frosted graphics. The same film cut on a plotter into logos, lettering, stripes or patterns, then applied piece by piece. Best for reception glass, door identification and manifestation marks.
- Printed frosted film. White or colour ink printed onto the frosted base, so a gradient, a cityscape or a bilingual slogan can sit inside the privacy band. Costs more, and it is the only option when the frosted film design needs more than one colour.
Most offices end up with a mix: plain bands on the department glass partitions, cut logos on meeting room doors and one printed feature wall behind reception.
Band heights that work in an open plan office
Privacy comes from where the band sits, not how much glass is covered. A frosted panel from floor to 900 mm hides shoes and nothing else. The table below is the set of heights we specify most often, measured from finished floor level.
| Location | Band position | Coverage | What it achieves |
|---|---|---|---|
| Meeting room walls | 900 mm to 1800 mm | About 35 percent | Hides seated heads and screens, keeps daylight above and below |
| Boardroom and HR rooms | 600 mm to 2100 mm | About 55 percent | Full seated and standing privacy, light still passes |
| Department glass partitions | 1000 mm to 1600 mm | About 22 percent | Breaks eye contact between desks, keeps the floor feeling open |
| Reception feature glass | Full height, printed | 80 to 100 percent | Brand statement, screens the back office |
| Glass doors | Two strips at 900 mm and 1500 mm | Under 10 percent | Manifestation so nobody walks into the glass |
Two safety strips on all clear doors and full height panels are something many fit out consultants in the UAE require before handover, and a plotter cut band of frosted glass stickers is the cheapest way to meet it while still carrying the logo.
Frosted film design rules for logos and patterns
Most of the disappointing jobs we are asked to replace went wrong at the artwork stage rather than on the glass. Five rules save a reprint.
- Minimum stroke of 4 mm for cut lettering. Thinner strokes lift during weeding and peel within months as the glass moves with temperature.
- Negative space over positive. Cutting the logo out of a frosted band, so the brand appears as clear glass, reads sharper from both sides than a frosted logo floating on clear glass.
- Design for both faces. Frosted film is viewed from inside and outside the room. Lettering reads correctly from one side only, so place text where the primary viewer stands, usually the corridor side.
- Keep patterns repeatable. A dot or line pattern that tiles every 300 mm can be cut in strips with invisible joins. One unrepeatable artwork across 12 metres of glass partitions costs more in labour than film.
- Bilingual text at matched heights. Arabic and English lines on the same frosted film design should share a cap height and baseline grid, or one language looks like an afterthought.
Need frosted stickers priced for your quantity?
Room by room in a UAE office
Meeting rooms
A 900 mm band with the room name cut out as clear glass at eye level does three jobs at once: privacy, wayfinding and brand. Pair it with desk name plates in the same typeface and the floor reads as one system.

Reception
Reception is where the printed version earns its price. A full height panel behind the desk with a soft gradient from solid white at the base to clear at the top screens the back office without making the entrance feel closed. The company name is better handled as reception signage in raised letters than as film, because film on the feature glass competes with it.
Department glass partitions
In an open plan office restraint wins. A single band at seated eye height in plain etched film is enough to stop people reading each other's screens. Leave logos off; there can be forty panels and the brand gets tiresome by the fifth.
External windows
Frost on a street facing ground floor window doubles as advertising space and cuts glare. For heat reduction the right product is window tinting, which can sit under the graphics.
What frosted film costs in the UAE
Prices below are supplied and installed on clean accessible glass in Dubai, Sharjah or Ajman, and include a site measure. Abu Dhabi and the northern emirates add a travel charge.
- Plain etched band: AED 55 to 80 per square metre, minimum charge about AED 400.
- Cut logos and lettering: AED 120 to 220 per square metre of finished graphic, depending on detail.
- Printed frosted film: AED 140 to 200 per square metre.
- Manifestation strips for a standard 900 by 2100 mm door: AED 90 to 140 per door including cutting.
A typical 60 person office with four meeting rooms, one boardroom and 20 metres of partition glass lands between AED 4,500 and 7,500 for the complete package. Lead time is 3 to 5 working days from approved artwork, and installation is normally done after 6 pm or on a Saturday so the office is not disrupted.
Mistakes that shorten the life of the film
- Installing on glass that was cleaned with a silicone based product. The film looks fine for a week and then develops silver bubbles. Glass should be washed with soapy water only before application.
- Running the band to within 2 mm of a frame. Leave a 3 to 5 mm gap all round so the edge can be squeegeed properly and sealant never touches the film.
- Choosing cheap calendered vinyl for frosted glass stickers on curved or oversized panels. It shrinks over a year and shows a clear halo at every edge. Cast film stays put.
- Printing dark colours onto the frost expecting them to pop. The base mutes colour by about 20 percent, so proof on a sample first.
If the office also needs opaque branding on solid walls, wall graphics use a different vinyl and are usually installed on the same visit. The same applies to window stickers for shopfront glass. Lettering above doors is handled with pre spaced vinyl decals. Statutory signs such as exit and fire point markers belong with safety and wayfinding signs, not on the frost.

How to get a frosted film quote
Send us a WhatsApp with the number of glass panels, their approximate width and height, a photo of the space and the logo file. We reply with a drawing showing band heights and coverage, a per metre price and the earliest install slot. For a wider interior fit out, our signage company page lists everything else we produce for offices. The frosted stickers page has sample photos of finished glass. Order the frosted film during the fit out, when the glass is bare and access is easy, and the install usually costs less than fixing it after the desks arrive.
Ready to get started?
Look, we have been in this business long enough to know what works and what doesn't. If you are not sure where to begin, just give us a call. No pressure, no sales pitch. We will walk you through the options and give you an honest quote.
What you get with us:
- Straight answers about what you actually need (not what costs most)
- Fair pricing. We will tell you how to save money where it makes sense
- Quick turnaround when you need it, or save by planning ahead
Need Frosted Stickers in the UAE?
Our team produces frosted stickers and related print for businesses across Dubai, Abu Dhabi, Sharjah and every emirate. Send us your brief for a same day quote.
Get Your Free Quote+971 56 978 6395
Atiya Naaz
Marketing Head, Branding Blitz
Atiya brings five years of hands on experience in the UAE printing and branding industry. Based in Abu Dhabi, she leads marketing team at Branding Blitz, helping businesses across Dubai, Abu Dhabi, Sharjah, and all emirates find right print solutions for their branding needs. Her expertise spans corporate identity materials, exhibition printing, packaging design, and digital marketing strategy for the regional market.
Related resources: See our stickers, stickers & labels and decals & vinyl pages for specifications, quantity pricing and design options across the UAE.



