+971 56 978 6395 info@brandingblitz.com

Glow in the Dark Signs: A Buyer Test Before You Install

Glow in the Dark Signs: A Buyer Test Before You Install

Before you fit glow in the dark signs, run this cupboard test, plan placement by light level and compare ten year costs against wired exit boxes.

In this guide
  1. How glow in the dark signs work, in two minutes
  2. The cupboard test for glow in the dark signs
  3. Where glow in the dark signs belong
  4. Glow in the dark signs or wired emergency exit signs
  5. Materials and formats we supply
  6. Five installation mistakes that fail certified signs
  7. Ordering glow in the dark signs from us

Glow in the dark signs are the only safety markers in a building that work when everything else has stopped. No power, no battery, no bulb. Which is exactly why they get bought on trust and rarely tested. A facilities team orders a hundred green running figure signs, they look fine in daylight, and nobody finds out they fade to nothing in fifteen minutes until an inspector switches the lights off in a stairwell.

We produce safety and wayfinding signs, including photoluminescent signs, in house in Ajman and fit them across the seven emirates. This is the test and placement guide we give building owners before they order glow in the dark signs, so the set passes inspection the first time.

How glow in the dark signs work, in two minutes

The sign face contains a pigment that stores light energy and releases it slowly as a visible glow. Older signs used zinc sulphide, which glowed brightly for twenty minutes and then died away. Modern signs use strontium aluminate, which charges faster, glows about ten times longer and does not degrade with repeated cycles. The pigment is bonded into a rigid PVC or aluminium panel or a self adhesive film, the pictogram is printed on top in opaque ink so the glow outlines the symbol, and a clear laminate protects the surface.

Two numbers matter. How much light the sign receives during the day, measured in lux, and how bright it is after a set time in darkness, measured in millicandela per square metre. Glow in the dark signs in a bright lobby charge fully in fifteen minutes. The same sign in a dim back corridor may never charge at all, which is the single most common reason photoluminescent signs fail on site.

The cupboard test for glow in the dark signs

Ask any supplier for one sample before placing an order, then do this.

  1. Lay the sample under normal office lighting, about 1 metre below a ceiling light, for 20 minutes.
  2. Take it into a windowless room or a cupboard and close the door. Start a timer.
  3. At 10 minutes the pictogram should be clearly readable from 5 metres.
  4. At 60 minutes it should still be visible from 3 metres, dimmer but legible.
  5. Compare it with a second sample charged under a phone torch for 2 minutes. A quality panel will glow noticeably brighter after the torch.

A sticker that is barely visible at 10 minutes is a decorative product, not a safety one. Also ask for the test certificate that states the luminance class, usually to DIN 67510 or ISO 17398, and keep it with the building fire file, because the inspector will ask for it before switching the lights off.

Where glow in the dark signs belong

Placement follows light, not habit. Every photoluminescent sign needs a charging source within normal view for most of the day.

LocationDaytime lightRecommended signHeight
Lobby and corridor exitsGoodRigid PVC exit sign, 30 by 15 cmAbove door, 2.0 to 2.2 m
StairwellsFairRigid panel plus stair nosing stripsWall at 1.2 m, nosings on each step
Underground car parksPoorLow level film signs under permanent lighting only0.4 to 1.0 m
Hotel guest corridorsFairLow level directional arrows0.4 m from floor
WarehousesVariableAluminium backed panels, 40 by 20 cm2.2 m and at floor on racking
Fire equipment pointsAnyExtinguisher and hose reel ID panelsAbove equipment

Low level signs matter more than most people think. Smoke rises, so in a real evacuation the clearest air is below one metre. A directional arrow at knee height, with glowing strips along skirting, guides people when the ceiling signs are hidden. Photoluminescent floor vinyl strips with an anti slip laminate do this job on stair edges and corridor floors.

Floor Vinyl
Floor VinylSizes, materials and quantity pricing for floor vinyl, printed in house and delivered across the UAE. View product

Need safety & wayfinding priced for your quantity?

Glow in the dark signs or wired emergency exit signs

Civil Defence requirements in Dubai and Abu Dhabi generally call for illuminated emergency exit signs on protected escape routes, with photoluminescent signs used alongside them for low level guidance, intermediate markers and equipment identification. In smaller buildings and tenancies the photoluminescent option is often accepted for secondary routes. Confirm the mix with your fire consultant, then compare costs honestly over ten years.

For a 200 sign hospital or mall back of house, the saving from using glow in the dark signs wherever the code permits runs well into six figures over the life of the fit out. The wired units stay where they are mandatory; everything else can glow.

Materials and formats we supply

Rigid PVC at 1 to 2 mm is the standard for wall mounted glow in the dark signs. Aluminium backed panels suit warehouses and car parks where knocks are likely, and sit alongside our metal and panel sign boards for the rest of the site. Self adhesive photoluminescent film, cut like vinyl stickers, goes on glass doors, handrails and equipment where a rigid plate cannot be drilled. For repeated low level arrows and stair nosings we die cut strips from the same film, and for painted floor markings in plants we supply stencil stickers for use with photoluminescent paint.

Sign Boards
Sign BoardsSizes, materials and quantity pricing for sign boards, printed in house and delivered across the UAE. View product

All pictograms follow ISO 7010 shapes and the green and white escape colour scheme, with bilingual text where the fire consultant specifies it. Door numbers in pre spaced vinyl lettering should sit nearby in the same style. Room identification should match the building's reception signage. The same finish logic runs out to the facade signage, so the safety signage looks like part of the design rather than an afterthought.

Five installation mistakes that fail certified signs

Certified glow in the dark signs still fail when they are fitted badly, and the rest of the safety signage goes down with them at inspection. These are the five we see most.

  1. Fitting them where lights are off by day. Store rooms, plant rooms and car park corners with motion sensor lighting never charge the pigment. Add a permanent low wattage light or use a wired unit.
  2. Painting or papering around them. A decorator's roller over the edge of a sign kills the glow permanently. Mask or remove and refit.
  3. Mounting behind glass or acrylic covers. Many covers block the UV part of the spectrum that charges the pigment fastest.
  4. Mixing grades. A corridor with bright panels at one end and cheap stickers at the other leads people towards the dark end. Buy one grade for the whole route.
  5. No record. Keep the luminance certificate, the layout drawing and a dated photo set. Inspections go faster and replacements match.

Ordering glow in the dark signs from us

Send a WhatsApp message with the floor plan or a walk through video and we will mark up a placement plan, send the certificate for the panel grade and quote per sign. Standard production is three to five working days in Ajman, delivery covers every emirate and installation can be booked for Dubai, Sharjah, Ajman and Abu Dhabi. For safety signage beyond escape routes, including hazard, mandatory and PPE signs for the same site, our signage services page lists the full range. PPE identification continues onto helmet stickers for site teams. Minimum order is a single sign, and we are happy to send a sample for the cupboard test first.

Helmet Stickers
Helmet StickersSizes, materials and quantity pricing for helmet stickers, printed in house and delivered across the UAE. View product

Ready to get started?

Look, we have been in this business long enough to know what works and what doesn't. If you are not sure where to begin, just give us a call. No pressure, no sales pitch. We will walk you through the options and give you an honest quote.

What you get with us:

  • Straight answers about what you actually need (not what costs most)
  • Fair pricing. We will tell you how to save money where it makes sense
  • Quick turnaround when you need it, or save by planning ahead

Need Safety & Wayfinding in the UAE?

Our team produces safety & wayfinding and related print for businesses across Dubai, Abu Dhabi, Sharjah and every emirate. Send us your brief for a same day quote.

Get Your Free Quote

+971 56 978 6395

AN

Atiya Naaz

Marketing Head, Branding Blitz

Atiya brings five years of hands on experience in the UAE printing and branding industry. Based in Abu Dhabi, she leads marketing team at Branding Blitz, helping businesses across Dubai, Abu Dhabi, Sharjah, and all emirates find right print solutions for their branding needs. Her expertise spans corporate identity materials, exhibition printing, packaging design, and digital marketing strategy for the regional market.

Related resources: See our desk accessories, marketing materials and decals & vinyl pages for specifications, quantity pricing and design options across the UAE.

Frequently Asked Questions

How long do glow in the dark signs stay visible after the lights go out?
Do photoluminescent signs need any electricity?
Can glow in the dark signs replace wired emergency exit signs completely?
How long do photoluminescent signs last before replacement?
+971 56 978 6395 info@brandingblitz.com Quick Enquiry Get Instant Quote
Follow Us