A tier by tier guide to home name plate cost in the UAE, from an AED 60 acrylic door plate to a backlit villa gate sign, with the extras that change the quote.
Most people asking about home name plate cost already have a picture in mind: a neat plate on the gate pillar or the apartment door, their family name in clean lettering, maybe Arabic above the English. The question is what that picture costs once material, size, fitting and lettering are added up. The honest answer for home name plate cost in the UAE runs from about AED 60 to well past AED 1,500, and the gap follows four budget tiers, and this guide walks through each one so you know what your money buys before you ask for a quote.
We make personalized home name plates in house in Ajman, cut and printed on the same machines we use for office and building signs, and deliver to every emirate. The figures below are what we quote today for single pieces, not bulk rates.
Home name plate cost at a glance
| Budget tier | Typical material | Common size | Where it suits |
|---|---|---|---|
| Under AED 100 | 3 mm printed acrylic or Forex | 15 by 8 cm to 20 by 10 cm | Apartment doors, mailboxes |
| AED 100 to 300 | 5 to 8 mm acrylic, laminated, or 1.5 mm anodised aluminium | 25 by 12 cm to 30 by 15 cm | Townhouse entrances, villa side doors |
| AED 300 to 700 | Brushed stainless steel, etched and paint filled | 30 by 15 cm to 45 by 20 cm | Villa gate pillars |
| AED 700 and above | Steel or brass with cut out letters, LED backlighting | 45 by 20 cm to 60 by 25 cm | Large villa gates, farm entrances |
Tier one: under AED 100
This is the apartment door and mailbox tier, and the lowest home name plate cost you will find without going to a sticker. A 3 mm acrylic plate, printed in full colour and laminated, with double sided foam tape on the back, costs AED 60 to 90 at 20 by 10 cm. Forex board is a few dirhams cheaper but scratches more easily, so we only suggest it for indoor corridors. The same money also covers a cut vinyl name applied directly to a glass panel or a letterbox door, which is a neat option when building rules forbid drilling.
What you give up at this level is depth and longevity. Printed acrylic in a shaded corridor looks fine for five or six years. In direct sun, move up a tier.
Tier two: AED 100 to 300
Here the house name plate gets thicker and the fixings get better. An 8 mm clear acrylic plate with reverse printed artwork, so the design sits behind the face and cannot be scratched, costs AED 150 to 220 at 30 by 15 cm, including four stainless standoffs. Anodised aluminium with UV printed text lands in the same range and takes heat better than acrylic on a west facing wall. For a townhouse front door this is the sweet spot of home name plate cost against lifespan, and it is the tier we sell most. A bilingual house name plate with Arabic and English adds AED 20 to 40 for typesetting and proofing, not more. For reference, the small plates we cut for desks and doors start at the same price point as our desk name plates, because the material and process are identical.
Need desk name plates priced for your quantity?
Tier three: AED 300 to 700
This is where most villa name plate orders land, and it is where home name plate cost starts to buy something that lasts twenty years. A 2 mm brushed stainless steel plate, laser etched, with the letters filled in black or deep brown paint, costs AED 380 to 550 at 40 by 20 cm. Add a second line for the villa number and street and the price barely moves, since the etching time is what matters, not the character count. Mounted with concealed studs into a block pillar, it sits flush and cannot be lifted off. Gate pillar plates share the same steel stock as our metal sign boards, cut to a smaller size.

Brass is the other classic choice for a villa name plate at this tier. It costs 20 to 30 percent more than steel and develops a patina in coastal humidity unless lacquered, which some owners love and others do not.
Tier four: AED 700 and above
At the top end, the plate becomes a small piece of architecture, and home name plate cost is driven by labour rather than material. Individually cut 10 mm letters, raised off a steel backing on hidden pins, start at AED 750 for a 50 cm wide name. An LED name plate, with a warm white strip hidden behind a halo cut face so the letters glow at night, runs AED 1,100 to 1,800 depending on width and whether an electrician needs to bring power to the pillar. The letter forms are made the same way as the 3D acrylic letters we build for shopfronts, only smaller.

For farm gates in Al Ain or large plots in Khawaneej, a 60 by 25 cm LED name plate with cut out letters and a weatherproof driver is the usual spec. Expect AED 1,500 to 2,500 installed. Beyond that size you are really commissioning a facade sign rather than a name plate, and the pricing logic changes.
The extras that move a home name plate quote
Four things change the final home name plate cost more than the material does, and they are the items people forget to mention when they ask for a price on WhatsApp.
- Installation. Tape and screws are free with the plate. A fitter visit for standoffs into a block pillar is AED 100 to 150 in Dubai and Sharjah, more for Abu Dhabi or the Western Region.
- Arabic typesetting. Arabic needs a calligraphic or a modern typeface that matches the Latin one, and the letters need about 15 percent more height to read at the same distance. We charge AED 20 to 40 for a bilingual proof, and we send it before anything is cut.
- Logos and crests. A family crest or a drawn motif adds vector tracing time, usually AED 50 to 120 once. A simple house symbol from a stock set costs nothing.
- Power. An LED name plate adds the driver, the cable and often an electrician. Budget AED 200 to 400 above the plate itself if the pillar has no existing feed.
Does the emirate change the price?
Slightly, and mostly through logistics rather than the plate. Our workshop is in Ajman, so Sharjah, Ajman and Umm Al Quwain deliveries are the cheapest, Dubai is next, and Abu Dhabi and Al Ain carry a courier or fitter travel charge of AED 50 to 150. Gated communities in Dubai sometimes have their own rules on villa name plate size and placement, which can push you toward a specific format, and some ask for the plot number in a set style, much like the wayfinding signs used inside the community. Check with the community management before you order, since a non compliant plate is the most expensive kind.

Ways to lower home name plate cost without a cheaper looking plate
Order the standard sizes. A 30 by 15 cm plate uses an offcut from our sheet stock, while a 33 by 17 cm plate wastes material and costs more. Pick one material and one finish rather than mixing steel letters on an acrylic backing. A house name plate in one material always looks more expensive than it was. Supply your artwork as a vector or a sharp photo of your handwriting if you want a signature style, so we skip the tracing fee. And bundle: a gate plate, a door plate and a small plate for the service entrance ordered together are cheaper than three separate jobs. The same logic applies to a wall sticker with the house number for the inside of the garage, which we can cut from the leftover vinyl.
If you are fitting out a new villa and also need numbers for the mailbox, parking bay and pool gate, mention it in the first message. Small secondary plates that match the main one cost AED 40 to 80 each when cut from the same sheet, and a set of pre spaced vinyl decals for the bins and parking bay is cheaper still. Personalized home name plates ordered as a set are where the per piece home name plate cost drops the most.
How to order from us
Send a photo of the spot where the plate will go, the text you want in English and Arabic, and a rough budget. We reply on WhatsApp with two options at your tier, a proof, and a delivery date. Standard acrylic and aluminium plates ship in three working days, etched steel in five to seven, and an LED name plate in ten. Everything is made in our Ajman unit alongside the reception signs and door plates we produce for offices. You can read more about residential and commercial options on our signage services page. The full marketing materials range covers the rest of what we print.
A good set of personalized home name plates is a one time purchase. Spend at the tier that matches the sun, the wall and how long you plan to stay, and it will outlast the paint around it.
Ready to get started?
Look, we have been in this business long enough to know what works and what doesn't. If you are not sure where to begin, just give us a call. No pressure, no sales pitch. We will walk you through the options and give you an honest quote.
What you get with us:
- Straight answers about what you actually need (not what costs most)
- Fair pricing. We will tell you how to save money where it makes sense
- Quick turnaround when you need it, or save by planning ahead
Need Desk Name Plates in the UAE?
Our team produces desk name plates and related print for businesses across Dubai, Abu Dhabi, Sharjah and every emirate. Send us your brief for a same day quote.
Get Your Free Quote+971 56 978 6395
Atiya Naaz
Marketing Head, Branding Blitz
Atiya brings five years of hands on experience in the UAE printing and branding industry. Based in Abu Dhabi, she leads marketing team at Branding Blitz, helping businesses across Dubai, Abu Dhabi, Sharjah, and all emirates find right print solutions for their branding needs. Her expertise spans corporate identity materials, exhibition printing, packaging design, and digital marketing strategy for the regional market.
Related resources: See our desk accessories and marketing materials pages for specifications, quantity pricing and design options across the UAE.

