Sizes, materials, bilingual text rules, mounting methods and AED prices for office name plates in the UAE, plus how to handle hot desks and staff changes.
- Start with the sizes
- Material comparison for a name plate design for office use
- Text, bilingual layout and legibility
- Mounting and planning for change
- Table top signage for desks and meeting rooms
- Matching plates to the rest of the office
- Mistakes that make a plate look cheap
- Ordering a name plate design for office floors
A name plate is the smallest sign in the building and the one people stand closest to. Visitors read it at arm's length, so every flaw shows: a scratched face, a font too thin for Arabic, a silver that does not match the next door. Getting a name plate design for office doors and desks right is mostly a matter of specification, and this guide is the sheet we use when a facilities manager asks us to plate a whole floor.
We cut, engrave and print name plates in house in Ajman, from a single replacement to a 300 door fit out, and deliver across the UAE. The sizes, materials and prices below are what we quote today.
Start with the sizes
Most problems with a name plate design for office use come from choosing the material before the size. Fix the size first, because it decides the text height, which decides the material that can carry it.
| Use | Standard size | Name text height | Mounting |
|---|---|---|---|
| Office door, name and title | 250 by 80 mm | 18 to 22 mm | Tape or two standoffs |
| Executive door, name only | 300 by 100 mm | 25 to 30 mm | Four standoffs |
| Meeting room | 300 by 120 mm | 30 to 35 mm | Standoffs or slide in holder |
| Desk plate, freestanding | 200 by 60 mm | 14 to 18 mm | Angled base or L stand |
| Cubicle or partition | 180 by 50 mm | 12 to 15 mm | Clip or slide rail |
Keep text height at or above 12 mm anywhere a person reads standing, and give Arabic about 15 percent more height than the English on the same plate because its letterforms sit lower on the line.
Material comparison for a name plate design for office use
Metal name plates
Brushed stainless steel and anodised aluminium are the workhorses of metal name plates in UAE offices. Stainless in 1.5 mm with laser etched and paint filled text costs AED 110 to 180 per door plate and keeps its finish for a decade. Aluminium is lighter and cheaper at AED 70 to 120 and takes a champagne anodised finish. Brass is the premium option at AED 220 to 350, with a lacquer coat to stop it tarnishing in humid air. Metal plates are the right choice for executive floors, law firms and anywhere the fit out already uses steel door furniture.
Acrylic name plates
Acrylic is the most flexible material and the one most often used badly. Done well, acrylic name plates are 5 or 10 mm clear panels with the text printed on the reverse, so the face stays smooth and the print is protected, mounted on satin standoffs. Frosted acrylic with cut vinyl text gives a softer look that pairs with frosted glass stickers on partitions. Prices run AED 55 to 110 per door plate. Done badly it means 3 mm sheet with surface print that scratches. Specify the thickness and reverse printing.

Wooden name plates
Walnut, oak and bamboo bring warmth to hotels, clinics, design studios and family offices. Wooden name plates are laser engraved, and pale woods read better from a distance because the burnt letter shows darker. Expect AED 90 to 160 for a door plate and AED 60 to 110 for a desk block. Seal the wood with matte lacquer or humidity dulls it within a year.
In practice a name plate design for office floors often mixes materials by zone: metal on the executive corridor, acrylic on open plan meeting rooms, wooden name plates on the wellness room and the pantry.
Text, bilingual layout and legibility
- Two lines, not three. Name on the first line, title or department on the second.
- Arabic above or to the right of English, never below it, on any plate in a government or semi government building, and preferably everywhere.
- Weight over elegance. Hairline fonts disappear when etched or engraved. Use a medium weight sans for English and a matching naskh for Arabic, with strokes at least 1.2 mm at final size.
- Contrast. Black or dark grey infill on brushed metal, white on dark acrylic, and nothing in gold on pale wood.
- Consistent margins. 12 mm on all sides at the 250 by 80 size. Text to the edge looks like a label.
Any name plate design for office doors should be proofed at actual size on paper and taped to a real door before the order is placed.
Need desk name plates priced for your quantity?
Mounting and planning for change
Staff move. A name plate design for office floors that ignores this ends up with mismatched replacements within a year. Three approaches work.
- Fixed plate, engraved name. Best look, highest cost per change. Suits executives and meeting rooms.
- Fixed frame, slide in insert. A metal or acrylic frame stays on the door and a printed insert slides in behind a clear window. The insert costs AED 8 to 15 and can be reprinted the same day. This is the right system for open plan teams and hot desks.
- Magnetic face. A steel backing plate stays fixed and a thin magnetic face carries the name. Room numbers beside it can be pre spaced vinyl decals applied straight to the door. Changes take seconds.
For fixing, 3M VHB tape holds a plate under 300 grams on painted doors and glass. Anything heavier needs standoffs or screws. Standoffs in the same finish add AED 20 to 40 and suit desk name plates and door plates alike.
Table top signage for desks and meeting rooms
A name plate design for office desks follows different rules from a door plate. Table top signage sits lower than the eye, so table top signage needs an angle of 20 to 30 degrees to be readable from a seated visitor's position. A heavy base matters more than the plate itself. Brushed steel or walnut bases at 200 by 60 mm stay put; thin acrylic L stands slide every time the desk is wiped. For boardrooms, matching seat plates with slide in name cards let the client print inserts in house. Our desk name plates in the UAE page lists the base styles we stock.
Matching plates to the rest of the office
A name plate design for office use looks expensive when it belongs to a system and cheap when it is an afterthought. Use the same typeface, infill colour and metal finish as the reception signage. The same goes for the desk accessories on the floor. Where the brand name appears in acrylic letters behind reception, pick acrylic name plates in the same colour. Meeting room plates should share a format with the wayfinding signs in the corridor, usually a coloured strip or icon on the left edge. A single panel sign board at the lift lobby listing the rooms completes the set.

Mistakes that make a plate look cheap
Most of these come from treating the name plate design for office doors as a stationery order.
- Choosing the material to match a photo rather than the door it is going on. Metal name plates in brass on a white laminate door look borrowed.
- Printing the company logo on every name plate. Once at reception is enough; on fifty doors it is noise.
- Using the English text height for Arabic, so the Arabic looks small and cramped.
- Ordering 3 mm acrylic with surface print to save AED 30 and replacing it twice.
- Mounting plates at different heights along the same corridor. Fix the centre line at 1500 mm from the floor and keep it.
Ordering a name plate design for office floors
There is no minimum, and lead time is 3 to 5 working days from an approved proof for metal and acrylic, 5 to 7 for wood. Send a photo of the door, the names and titles as text, and the material preference on WhatsApp, and we return a scaled proof with the price. Larger office programmes usually sit alongside the other items on our office essentials page. The signage company page covers the lobby and exterior work. A name plate design for office doors is a small job, but it is the sign your visitors read most closely, so it is worth the five minutes with a paper proof.
Ready to get started?
Look, we have been in this business long enough to know what works and what doesn't. If you are not sure where to begin, just give us a call. No pressure, no sales pitch. We will walk you through the options and give you an honest quote.
What you get with us:
- Straight answers about what you actually need (not what costs most)
- Fair pricing. We will tell you how to save money where it makes sense
- Quick turnaround when you need it, or save by planning ahead
Need Desk Name Plates in the UAE?
Our team produces desk name plates and related print for businesses across Dubai, Abu Dhabi, Sharjah and every emirate. Send us your brief for a same day quote.
Get Your Free Quote+971 56 978 6395
Atiya Naaz
Marketing Head, Branding Blitz
Atiya brings five years of hands on experience in the UAE printing and branding industry. Based in Abu Dhabi, she leads marketing team at Branding Blitz, helping businesses across Dubai, Abu Dhabi, Sharjah, and all emirates find right print solutions for their branding needs. Her expertise spans corporate identity materials, exhibition printing, packaging design, and digital marketing strategy for the regional market.
Related resources: See our desk accessories and marketing materials pages for specifications, quantity pricing and design options across the UAE.



