+971 56 978 6395 info@brandingblitz.com

Name Plate Size Chart for UAE Offices: Desk, Door and Wall

Name Plate Size Chart for UAE Offices: Desk, Door and Wall

Stop guessing from thumbnails. A five minute method turns viewing distance into letter height and plate size, with a chart for desk, door, corridor and lobby.

In this guide
  1. Name plate size starts with viewing distance
  2. Name plate size chart for UAE offices
  3. Desk name plates: the holder decides the size
  4. Door name plates: height and hand
  5. Bilingual plates add height, not width
  6. Material changes the margins
  7. One name plate size standard for the whole building
  8. Five mistakes that waste a reorder

Name plate size is usually decided by looking at a thumbnail on a supplier's page and picking the one that seems normal. Then the plates arrive, the engraved title wraps onto a third line, the Arabic is squeezed, and the meeting room sign cannot be read from the corridor. There is a better method, and it takes five minutes: start from the viewing distance, work out the letter height that distance needs, count your lines, and the plate size falls out of the arithmetic. This guide gives you that method, a chart for desk, door and wall plates, and the procurement rule that keeps a whole building consistent. We cut and print plates in house in Ajman and deliver across the UAE.

Name plate size starts with viewing distance

The eye needs roughly 8 to 10mm of capital letter height for every metre of viewing distance to read a name comfortably without stepping closer. A visitor at a reception counter stands about a metre from the plate, so 8 to 10mm capitals are enough. Someone approaching an office door reads it from about 1.5m, so 12 to 15mm. A meeting room sign read from across a corridor at 3m needs 25mm capitals. Once you know the letter height, the plate height for a single line is about three times the capital height, and each extra line adds the letter height plus a gap of half that again.

Worked through, the name plate size for a one line desk plate at 10mm capitals needs a plate about 30mm tall; a two line plate with name and title about 50 to 55mm; a three line bilingual plate about 80mm. Width is set by the longest line. English text runs around 0.6 times the capital height per character, so a 28 character line at 10mm capitals needs roughly 170mm plus margins. That is why most desk plates settle around 220 by 60mm rather than anything smaller.

Name plate size chart for UAE offices

LocationViewing distanceCapital heightLinesRecommended size
Desk, name only1m10mm1180 x 50mm
Desk, name and title1m10mm and 7mm2220 x 60mm
Desk, bilingual name and title1m10mm and 7mm3 to 4250 x 90mm
Office door1.5m14mm2200 x 80mm
Office door, bilingual1.5m14mm4250 x 120mm
Meeting room, corridor3m25mm1 to 2350 x 120mm
Department entrance4 to 5m40mm1 to 2500 x 150mm
Reception counter1 to 2m15 to 20mm1300 x 80mm

Use the chart as a floor, not a ceiling, for office name plates of every kind. If a title is long, grow the width and keep the letter height; shrinking the letters to fit a small plate defeats the point of having one.

Desk name plates: the holder decides the size

Desk name plates sit in an angled holder, a slot in a block, or stand on a folded metal base, and the holder has a fixed aperture. Choose the holder first, then order desk name plates to fit it, because a 220 by 60mm plate in a holder cut for 200 by 50mm will not go in. For open plan floors with shared desks, a slide in acrylic holder with a printed paper or PVC insert lets HR change names for a few dirhams rather than reordering an engraved plate at AED 60 to 120 each.

Need desk name plates priced for your quantity?

Door name plates: height and hand

Name plate size for a door follows the 1.5m row of the chart. Mount door name plates at 1500mm from floor to centre, on the latch side of the door frame rather than on the door itself, so the name stays visible when the door is open. Door name plates get a larger name plate size than desk plates because people read them while walking. If the office has glass partitions, a frosted vinyl panel at the same height does the job without drilling and can carry the name in cut letters.

Sign Boards
Sign BoardsSizes, materials and quantity pricing for sign boards, printed in house and delivered across the UAE. View product

Bilingual plates add height, not width

Arabic and English on one plate is normal in government, banking and client facing offices across the UAE. The common mistake is to put the two languages side by side, which doubles the width and makes both lines small. Stack them instead: English above or below Arabic, each at full letter height. That roughly adds 40 percent to the name plate size in height and nothing to the width, which is why bilingual rows in the chart sit at 90 and 120mm tall. Check with the sign maker that the Arabic font has a true bold weight, because thin Arabic strokes disappear in engraving.

Material changes the margins

Material does not change the letter height rule or the name plate size, but it changes the margin you need. Engraved brass or stainless steel wants a 10mm margin all round because the plate edge is finished and visible. Printed acrylic with a standoff can run a 6mm margin. For cut acrylic letters on a reception wall there is no plate at all, so the size is simply the letter height from the table applied to the viewing distance of the lobby, usually 60 to 150mm. Outside the building, facade lettering follows the same rule at 20 to 50m, which is why it runs to 300mm and more. The reception signage behind the desk is read from 3 to 6m, which is why 100mm letters look right there and 40mm letters look timid.

Acrylic Letters
Acrylic LettersSizes, materials and quantity pricing for acrylic letters, printed in house and delivered across the UAE. View product

One name plate size standard for the whole building

Facilities teams in Business Bay towers and Abu Dhabi government offices lose money by letting each department order its own office name plates. One name plate size standard fixes that. Write a short standard: three sizes from the chart, one material, one font pair, one mounting height, and one supplier holding the template. Every new joiner's plate is then a two line message with a name and a title, delivered in two to three days, and it matches the plate next door. We hold these templates for clients and produce single plates from them at the same unit price as the original batch of fifty.

The same standard should cover the wayfinding signs, so that the department entrance plate and the fire exit sign use the same typeface at their own letter heights. Add staff name badges to the template too; a badge is a tiny name plate read at arm's length, so 6 to 8mm capitals and a 75 by 30mm format works for most uniforms. Staff who move between sites can wear the same format on ID cards instead.

Safety & Wayfinding
Safety & WayfindingSizes, materials and quantity pricing for safety & wayfinding, printed in house and delivered across the UAE. View product

Five mistakes that waste a reorder

Get the name plate size right once and the rest is paperwork. If you send us a photo of the desk or door and the longest name and title you need to carry, we will return a sized proof the same day. The desk name plate page lists materials and prices. Our office essentials range covers the holders and badges that go with them. The signage page covers the larger plates.

Ready to get started?

Look, we have been in this business long enough to know what works and what doesn't. If you are not sure where to begin, just give us a call. No pressure, no sales pitch. We will walk you through the options and give you an honest quote.

What you get with us:

  • Straight answers about what you actually need (not what costs most)
  • Fair pricing. We will tell you how to save money where it makes sense
  • Quick turnaround when you need it, or save by planning ahead

Need Desk Name Plates in the UAE?

Our team produces desk name plates and related print for businesses across Dubai, Abu Dhabi, Sharjah and every emirate. Send us your brief for a same day quote.

Get Your Free Quote

+971 56 978 6395

AN

Atiya Naaz

Marketing Head, Branding Blitz

Atiya brings five years of hands on experience in the UAE printing and branding industry. Based in Abu Dhabi, she leads marketing team at Branding Blitz, helping businesses across Dubai, Abu Dhabi, Sharjah, and all emirates find right print solutions for their branding needs. Her expertise spans corporate identity materials, exhibition printing, packaging design, and digital marketing strategy for the regional market.

Related resources: See our desk accessories, marketing materials and accessories pages for specifications, quantity pricing and design options across the UAE.

Frequently Asked Questions

What is the most common name plate size for an office desk in the UAE?
How high should a door name plate be mounted?
Do bilingual plates need to be wider?
Can I order a single replacement plate that matches an old batch?
+971 56 978 6395 info@brandingblitz.com Quick Enquiry Get Instant Quote
Follow Us